Step 1

Go to store tiles and look exactly the same plate as the one you want to replace. Preferably take the plate as a pattern to make sure that you buy exactly the same.
Step 2

On the occasion buy tile adhesive, mortar and land.
Step 3

Remove the seam / groove around the damaged tile with
awls or chisels and damaged plate. Be careful not to damage adjacent tiles.
Step 4

Break the hammer and chisels plate on a very tiny pieces.
Chicago Bathtubs Refinishing
Chicago Tile Refinishing
Chicago Cleaning Services
Chicago Carpet Cleaning
Step 5

Chisel remove the old adhesive and grout from the tile removed. This operation will be a bit time consuming, but the better cleanse the surface, the better it will fit the new.
step 6

Apply glue to the plate trowel.
step 7

Insert the plate in place of the removed and carefully fit to lay evenly and press down. Wait until the glue.
step 8

Then fill in the groove in the free space around the plate. Sponge, wipe the excess and smooths the whole.
Step 9

Wait about 15 minutes until dry fugue.
step 10

Allow to dry 24 h. After this time you can decorate a special lacquer to groove joints – impregnation, which prevents the joints during washing washed platelets, and prevent discoloration. Furthermore, does not create the stone, and mold and other air raids, when the plate is in constant contact with water.